A contractor with a policy protecting all installed work and covering the entire cost of the project is carrying _____ insurance.
a. general liability
b. builder’s risk
c. equipment floater
d. worker’s compensation
b. builder’s risk
You might also like to view...
A compressor belt tensioner is bouncing rapidly with the engine running. What should the technician do?
A) Remove the tensioner and lubricate the dampener B) Replace the tensioner C) Tighten the tensioner center bolt D) Nothing, this is normal
____ implies that a tolerance, modified by the symbol M with a circle, requires a part to be machined to a size limit where it contains the maximum amount of material.
A. Least material condition B. Maximum material condition C. Runout material condition D. Profile material condition
A bolt that is threaded into a casting is often called a ________
A) Stud B) Crest bolt C) Cap screw D) Block bolt
During a fuel injector pressure drop test, the difference between any two fuel injectors should not exceed?
A) 1.5 PSI B) 0.4 PSI C) 14.7 PSI D) 15 PSI