Technician A says the neutral safety switch is used on vehicles with automatic transmissions. Technician B says the neutral safety switch is used on vehicles with manual transmissions. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technician A and B
D. Neither Technician A nor B
Answer: A
You might also like to view...
Two technicians are discussing the machining of brake drums. Technician A says that most brake drums cannot be machined more than 0.060 in. oversize. Technician B says that brake drums on a common axle should be machined to within 0.035 in. of each other. Which technician is correct?
A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technician A nor B
With the ignition off and the key out of the ignition, what should happen if a technician uses a screwdriver to gently push on the throttle plate in an attempt to open the valve?
A) The throttle should move, and then spring back to the home position when released. B) The throttle should move closed, but not open further than the default position. C) Nothing. The throttle should be kept from moving by the motor, which is not energized with the key off. D) The throttle should move and stay where it is moved and not go back unless moved back.
The resistance reading of a good 5 kW heating element is
A) A measurable resistance of approximately 12 ohms B) Infinite ohms, would show OL on most digital meters C) A measurable resistance of approximately 5 ohms D) 0 ohms, would show 0.0 to 0.1 on most digital meters
In the mono-stable multi-vibrator (one-shot) configuration of the NE555 timer shown in Figure 15.50 in the text, assume R1 = 10 k? and that the output pulse width is T = 10 ms. Determine the capacitance C.