_____ are preplaced filler metals used for the root pass when consistent, high-quality welds are required.?
?
 

Fill in the blank(s) with the appropriate word(s).


Consumable inserts

Trades & Technology

You might also like to view...

OBD II DTCs have five characters, a letter followed by four numbers. What do the characters represent?

What will be an ideal response?

Trades & Technology

In a machining operation using a horizontal boring machine, assume that sensors have been installed to measure cutter vibration (v), product surface roughness (s), product dimensional accuracy (a), and cutter temperature (t), and assume that the sensors send the following digital signals:

v =1 for excessive vibration
t =1 for high temperature
s =1 for poor product surface
a =1 for poor quality

Otherwise these signals are ‘0’s. Design a logic circuit which has two outputs, codes yellow (Y) and red (R). Code yellow is a "1" if any one of the sensor signals is a 1. The code red is a "1" if more than one of the sensor signals is 1; otherwise both outputs are ‘0’s.

Conditions and outputs
i. Yellow when any of the signal is 1
ii. Red when more than one signal is 1

What will be an ideal response?

Trades & Technology

When owners find evidence that a dog has eliminated on the kitchen floor, the best way to teach it to not repeat that unacceptable behavior is to rub its nose and face in it

A. True B. False

Trades & Technology

A recycled refrigerant container has been checked and found to be above the given pressure limit for ambient temperature. Technician A says that the refrigerant container should be placed in a cooler storage area before use. Technician B says that the vapor in the container should be slowly vented into a refrigerant handling unit. Who is right.

A) A only B) B only C) Both A and B D) Neither A nor B

Trades & Technology