Steam enters an insulated nozzle at 1.0 MPa and 400°C, at a velocity of 3 m/s. For an exit pressure of 400 kPa, using your model for a nozzle, plot the exit velocity for exit temperatures ranging from 280°C to 380°C.
Given: Steam, P1 = 1.0 MPa, T1 = 400°C; V1 = 3 m/s; P2 = 400 kPa
Insulated, so assume, Q?=0
For a nozzle, assume steady –state, steady-flow single-inlet, single-outlet flow, and assume that W?=?pe=0
These assumptions result in the first law being (State 1 is inlet, State 2 is outlet)
Take h1 = 3264.39 kJ/kg
You might also like to view...
All of these statements about heavy-duty coil springs are true EXCEPT:
A. Larger wire diameter than regular duty coil springs B. 3 to 5 percent more load-carrying capacity than regular duty coil springs C. Shorter free length than regular duty coil springs D. A high aluminum content in the spring material
The following products have inherent dangers while being used. Identify the danger and develop ideas to overcome or limit it:
a. electric toaster b. electric hedge trimmer c. chain saw d. incandescent light bulb
Technician A says that air bag electrical terminals are copper-plated to protect against corrosion. Technician B says that pretensioners are explosive (pyrotechnic) devices which remove the slack from the seat belt and help position the occupant. Who is right?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Layers for the foundation and floor framing information should start with a prefix of ____.
A. DIM B. ANNO C. OUTL D. FNDN