When developing an oblique drawing, after completing the orthographic view, draw parallel receding lines at about ____° angles from the corners of the view to develop the three-dimensional effect.
A. 15
B. 30
C. 45
D. 60
Answer: C
You might also like to view...
What is the heat-transfer rate from the compressor?
Carbon dioxide gas enters a water-cooled compressor at conditions 
= 1 bar and 
= 10°C, and is discharged at conditions 
= 36 bar and 
= 90°C. The entering 
flows through a 10-cm-diameter pipe with an average velocity of 10 
, and is discharged through a 3-cm-diameter pipe. The power supplied to the compressor is 
Five mutually exclusive cost alternatives that have infinite lives are under consideration for decreasing the fruit-bruising rates of a thin skin-fruit grading and packing operation (peaches, pears, apricots, etc.). The initial costs and cash flows of each alternative are available. If the MARR is 15% per year, the one alternative to select is:
 FIGURE 1.png)
A flat surface may be obtained by the process of:
A) Short stroke filing B) Filing only on the return stroke C) Filing only on the forward stroke D) Draw filing
Refer to the figure. Determine the difference in length between pipes J and M
Fill in the blank(s) with the appropriate word(s).