Describe the purpose of TIC 100, and how it works.
What will be an ideal response?
Temperature Control Loop TIC-100
The temperature control loop utilizes a hot oil system to heat up the feed to C-202. The set point for the system is 180ºF @ 225 GPM @ 135 psig. Figure 10-5 illustrates Temperature Control Loop 100. The basic components of TIC-100 include:
• Temperature recorder 100
• Temperature element- thermocouple in thermowell
• Temperature transmitter
• Temperature indicating controller
• Transducer
• Temperature control valve
You might also like to view...
What type of weld is required based on the symbol shown in Figure 4?
a. Bevel groove with removable backing
b. V-groove with removable backing
c. V-groove with a plug weld on the other side of the joint
d. V-groove with permanent backing
The moment of a force can commonly be described as its _____.
a. leverage b. power c. strength d. magnitude
A(n) ____________________ is used when sealing irregular surfaces.
Fill in the blank(s) with the appropriate word(s).
OBD II systems are highly efficient and only illuminate the malfunction indicator light (MIL) when an emissions failure has occurred that will raise emission levels 50 percent above the FTP levels.
Answer the following statement true (T) or false (F)