Define chamfer and provide comprehensive information about how chamfers are dimensioned.
What will be an ideal response?
A chamfer is a slight surface angle used to relieve a sharp corner. Chamfers of 45° are dimensioned with a note, while other chamfers require an angle and size dimension, or two size dimensions. A note is used on 45° chamfers because both sides of a 45° angle are equal. When placing the 45° chamfer note, the size is followed by the (X) symbol and then the 45° angle without spaces. For example, 3X45°. Both sides of a 45° angle are equal. For this reason, another option is to place the value for the dimension of the sides in the note and leave out the 45° angle, such as 3 X 3.
You might also like to view...
Which of these statements about modern mass air flow sensors is true?
A. The sensor alters a reference voltage. B. The sensor uses a hot wire for sensing air temperature. C. The sensor produces a digital signal. D. The sensor uses voltage to sense air flow.
A rating of _________ IIC for the floor would be the most satisfying for individuals.
A. 45 B. 55 C. 65 D. 35
Which of the following is not typical for applying a RTV gasket maker?
A. Cleaning mating surfaces with mineral spirits B. Apply a continuous bead 3mm in size C. Wipe away excess sealant D. Takes 24 hours to fully cure
A cam, a cam shaft, and a hub are all basic components of a cam mechanism.
Answer the following statement true (T) or false (F)