Which of the following statements is true about inventory management?

A) Inventories are usually insignificant on the balance sheet.
B) Inventory is not important at the production planning level.
C) Inventories and production can be managed separately.
D) All of the above are true.
E) None of the above is true.


E

Trades & Technology

You might also like to view...

________ and ________ were the first scientists to publish the structure of a DNA molecule in 1953.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

The ____ let(s) you know where the parts are to be sent once you have completed your part of the assembly process.

A. project routing information B. title box C. bill of materials D. specifications

Trades & Technology

A CNC machine tool table is powered by a servo motor, lead screw and optical encoder. This lead screw has a pitch of 5mm and is connected to the motor shaft with a gear ratio of 16:1 (16 turns of the motor for one turn of the lead screw). The optical encoder is connected directly to the lead screw and generates 200 pulses per revolution of the lead screw. The table must move a distance of 100mm at a feed rate of = 500mm/min. Determine (a) pulse count received by the control system to verify that the table has moved exactly 100mm, (b) pulse rate, and (c) motor speed that corresponds to the feed rate of 500mm/min. If the range of the work table axis is 500mm and there are 12 bits in the binary register used by the digital controller to store the position, determine the control resolution.

What will be an ideal response?

Trades & Technology

A light-colored, slightly raised mark on the skin formed after an injury or lesion of the skin has healed is called a/an:

What will be an ideal response?

Trades & Technology