On a TXV system, the thermal sensing bulb is located at the ________
A) Evaporator inlet B) Condenser outlet C) Condenser inlet D) Evaporator outlet
D
You might also like to view...
Once you have the system recognizing the motor and encoder, you get an alarm indicating that it does not know where the zero or home position for that axis is located. What would be the likely corrective action to this problem?
You are working on a robot that has a servo drive alarm and find blown fuses on the drive. In the course of gathering information, you discover that the motor has a loose connection, which caused it to overheat, damaging the internal windings and the motor encoder. Once you replace the motor and encoder, you get another servo drive alarm that indicates there is a bad card in the drive.
The amount of induced voltage in an inductor can be computed if the resistance of the wire in the coil and ____ are known.
a. the amount of circuit current b. the length of the circuit c. any alternating current sources d. its capacitance
Sow productivity is the foundation of commercial pork production
Indicate whether this statement is true or false.
Which type of fire extinguisher should be removed from service when due for its next inspection?
A. Cartridge operated foam or soda acid B. Multi-purpose dry chemical C. Standard dry chemical D. Carbon dioxide