A business process describes a specific set of _____.?

A. ?transactions
B. ?employees
C. ?events
D. ?results


Ans:
A. ?transactions
C. ?events
D. ?results

Computer Science & Information Technology

You might also like to view...

Before tokenizing a string, you should use the ____________ method to remove leading and/or trailing white-space characters and prevent them from being included in the first and last tokens.

a. Trim b. Remove c. Split d. Sub string

Computer Science & Information Technology

Desktop apps can be run from either the ________ screen or the desktop

A) lock B) Start C) Tile D) Group

Computer Science & Information Technology

In this lab, you are configuring OSPF to the adjacent LAN for the network shown in Figure 1. You will be required to verify that computers in your LAN can ping the neighbor LAN. Note that a serial interface is being used to interconnect the LANs. You are configuring routing for both 172.20.15.0 and 192.168.25.0 networks. A subnet mask of 255.255.255.224 is being used. Use 56000 for the clock rate on the serial link (DCE interface). Use a subnet mask of 255.255.255.252 on the serial link connecting the two routers.

Computer IP Addresses, Subnet Masks, and Gateway Addresses


1. Configure the gateway address for FastEthernet 0/0 and the serial s0/0/0 interfaces on
Router R1. You also need to configure the IP address and the gateway address for PC-1.
Use the IP address and subnet mask specified in Table 1. You will need to enable each
interface and set the clock rate on the serial interface to 56000. List the router prompts
and commands used to configure the interfaces.
2. Configure the gateway address for FastEthernet 0/0 and the serial s0/0/1 interfaces on Router R2. Use the IP addresses and subnet masks specified in Table 1. Enable each interface and list the router prompts and commands used to configure the interfaces.
3. Configure the host name for your routers. R1 should be renamed LAN-A, and R2 should be renamed LAN-B. List the router prompts and commands used to configure the router’s host name.
4. The proper commands to verify that the interfaces on the LAN-A and LAN-B routers have b

Computer Science & Information Technology

The SATA interface is faster than the EIDE interface

Indicate whether the statement is true or false

Computer Science & Information Technology