When jump starting, ________
A) The last connection should be to the positive post of the dead battery
B) The last connection should be to the engine block of the dead vehicle
C) The generator must be disconnected on both vehicles
D) Both B and C
B
You might also like to view...
Intake charge velocity has to be ________ to prevent fuel droplet separation
A) 50 feet per second B) 100 feet per second C) 300 feet per second D) 25 feet per second
Only two substances should be in the refrigeration system for proper operation. They are ____________________ and oil.
Fill in the blank(s) with the appropriate word(s).
It is recommended that the thickness of mortar joints between arch brick be a _____ .
A. minimum of ¼" B. maximum of ¼" C. minimum of ½" D. maximum of ½"
Solenoids and starter relays used on computer-controlled vehicles have an internal ____________________ to provide protection from voltage spikes that occur when the magnetic field in the relay collapses.
Fill in the blank(s) with the appropriate word(s).