Examination of the input and output signals of an IC inverter reveals a delay from the time the input goes LOW until the output goes HIGH. The delay between these two signals should be measured at the ________ amplitude points and be labeled ________

A) 100 percent, tPLH B) 50 percent, tPLH C) 100 percent, tPHL D) 50 percent, tPHL


B

Trades & Technology

You might also like to view...

?Before welding on the AWS SENSE workmanship sample, what temperature must a plain carbon steel part be above?

A. ?32°F (0.0°C) B. ?100°F (37°C) C. ?50°F (9.4°C) D. ?0.0°F (-18°C)

Trades & Technology

Describe the purpose of presentation elevations:

What will be an ideal response?

Trades & Technology

Using appropriate diagrams, describe the resultant effect of a sudden reduction of the capacity (bottleneck) on a highway both upstream and downstream of the bottleneck.

What will be an ideal response?

Trades & Technology

Technician A says that to check the operation of a vacuum brake booster, the brake pedal should be depressed until the assist is depleted and then start the engine. Technician B says that the brake pedal should drop when the engine starts, if the booster is okay. Which technician is correct?

A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technician A nor B

Trades & Technology