Is it acceptable to throttle the valve on the suction connection to the pump?
What will be an ideal response?
NO
You might also like to view...
Fractions smaller than 1/16 of an inch, such as 1/32 and 1/64 of an inch, are not commonly used in fabrication.
Answer the following statement true (T) or false (F)
Relief valves are used to control maximum pressures in a hydraulic circuit.
Answer the following statement true (T) or false (F)
The formula for calculating the volume of a cylinder is ____________________
Fill in the blank(s) with correct word
The difference between a D-latch and an edge-triggered D-type flip-flop is that the latch:
A) is controlled by the logic level at its ENABLE input rather than a CLK transition. B) triggers on either the rising or falling edge of an ENABLE signal rather than the CLK input logic level. C) always "latches" the Q output to the complement of the D input regardless of other inputs. D) always "latches" the Q output to the D input regardless of other inputs.