A CAD operator needs to calculate the total cost of the wall switches for a building with 7 floors. On each floor, there are 16 single-pole, single-throw switches at $1.82 each; 15 single-pole, double-throw switches at $2.25 each; and 13 doublepole, double-throw switches at $3.37 each. What is the cost of the switches for the entire building?
What will be an ideal response?
$746.76
You might also like to view...
Known as ____, procedures for regaining control of systems and restoring operations to normalcy are the heart of the IR plan and the CSIRT's operations.
A. disaster recovery strategies B. IR reaction strategies C. CSIRT policies D. detection and recovery
Answer the following statement(s) true (T) or false (F)
If the total rise is 57” for a set of stairs the largest possible unit rise is 7 1/8”.
______ substances can, when allowed to mix or come into contact with other substances, create harmful gases or start a fire
A. Toxic B. Reactive C. Flammable D. Corrosive
A V groove weld symbol shows (7/16) to the left of the weld symbol along with a 3/8 to the left of (7/16), both of which are under the reference line. The notation "OAWMA" is in the tail. This welding symbol means ____.
A. the weld depth on the arrow side should be 3/8", and the root penetration should be 7/16". The depth of the chamfering should be 1/16". The welding process is to be by oxyhydrogen welding with machine welding. B. the depth of the chamfering should be 3/8" on the arrow side, the root penetration should be 1/16", and the total weld depth should be 7/16". The welding process is to be by oxyacetylene welding with manual welding. C. the depth that the weld penetrates the surface should be 7/16" on the arrow side and the root penetration should be 3/8". The welding process is to be by oxyacetylene welding with manual welding. D. the weld depth on the arrow side should be 7/16" and the root penetration should be 3/8". The depth that the weld penetrates the surface should be 1/16". The welding process is to be by oxyacetylene welding with manual welding. E. None of the above. This is an incorrect symbol.