To ensure that molten metal is blown away from the cut, the A-CAC operator should set the air pressure
regulator to _____.
a. the highest pressure possible
b. 20 psig (1.38 bars)
c. 150 psig (10.3 bars)
d. the lowest pressure that will reliably do the job
d
You might also like to view...
What is the difference between a contactor and a magnetic starter?
What will be an ideal response?
An item is to be constructed by laying three components in a row. The length of each component will be measured.
a. If the uncertainty in measuring the length of each component is 1.2 mm, what is the uncertainty in the combined length of the three components? b. If it is desired to estimate the length of the item with an uncertainty of 0.5 mm, what must be the uncertainty in the measurement of each individual component? Assume the uncertainties in the three measurements are the same.
A dual-diaphragm vacuum booster allows engineers to design a ________ brake booster
A) Less expensive B) Smaller diameter C) Lighter weight D) Shorter
Turn signals should be used:
a) At least 100 feet before turning or changing lanes b) At least 150 feet before turning or changing lanes c) At least 200 feet before turning or changing lanes