The valves may be retained in the valve body by any of these EXCEPT ________.
A) A sleeve
B) A rivet
C) A plug
D) Cover plate
D) Cover plate
You might also like to view...
Most GM transmissions use a rotor-type oil pump.
Answer the following statement true (T) or false (F)
(a) A copper?75 percent silver alloy is slowly cooled from the liquid state to 900°C, and allowed to come to equilibrium. Estimate the amount and composition of both the liquid and solid phases.
(b) Make a sketch of the 900°C equilibrium structure of the alloy. (c) Now assume the alloy is slowly cooled to just below the eutectic temperature. What are the weight percentages and compositions of the phases and constituents at this point?
Technician A says that horn frequency can range from 1,800 to 3,550 Hz. Technician B says that most horn circuits use a relay and the current through the relay coil is controlled by the horn switch. Who is right?
A) A only B) B only C) Both A and B D) Neither A nor B
How does a bleeder valve seal?
A) O-ring B) Lip seal C) By the threads D) Tapered end