Disc brakes use replaceable friction material called ________
A) Core B) Pads C) Linings D) Web
B
You might also like to view...
When possible, set the shielding gas flow rate on GMA, GTA, and ____ welding processes at the lower end of the flow rate range to reduce the shielding gas cost.
A. FCA B. GFCI C. FOW D. EPA
Building codes require any components in contact with the ground, masonry, or concrete, such as sill plates, to be _____.
a. made from treated lumber b. coated with a fungicide c. placed on top of termite shields d. unseasoned lumber
Use the following information to solve problems 7 through 10. A drafter must determine several measurements before a gear can be drawn. These measurements are often found by using formulas. Most gear-cutting data can be found if the diametral pitch P and the number of teeth N are known. Given the diametral pitch P is 8, and the number of teeth N is 96, use the following formulas to solve the problems.a. Pitch Diameter D: b. Outside Diameter O:
c. Addendum A:
src="https://sciemce.com/media/4/ppg__examview__image32__00001_res__sa007-3.jpg" border="0">d. Thickness of the Gear Tooth T: e. Depth of the Gear Tooth W:
Find the pitch diameter D.
What will be an ideal response?
If both inputs of an S-R flip-flop are low, what happens when the clock goes high?
A) The output resets. B) An invalid state is produced. C) No change occurs in the output. D) The output toggles.