Technician A says that a MAP sensor can be tested by visual inspection, testing the output using a digital meter, or a scan tool. Technician B says that a light engine load results in low intake manifold vacuum and a high MAP sensor signal voltage. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A
You might also like to view...
Air is heated from 20°C to 100°C. Determine the change in specific internal energy and the change in specific enthalpy for the air, assuming ideal gas with constant specific heat behavior.
Given: T1 = 20°C; T2 = 100°C What will be an ideal response?
The subsequent problems deal with a measurement system with a frequency response as shown below: What is the bandwidth of the system
A. 0.707 rad/sec to 3.439 rad/sec B. 1 rad/sec to 3 rad/sec C. 0.707 rad/sec to 3.707 rad/sec D. 0.707 rad/sec to 4.5 rad/sec E. 0 rad/sec to 4.5 rad/sec
For the circuit of Figure P3.20, use mesh analysis to find four equations in the four mesh currents. Collect coefficients and solve for the mesh currents.
The smaller the scale, the smaller the drawing
Answer the following statement true (T) or false (F)