The diameter, or size of the center cutting orifice, determines the thickness of the metal that can be cut.
Answer the following statement true (T) or false (F)
True
You might also like to view...
Which abnormal visual finding might process technicians find with solids handling equipment? (Select all that apply.)
a. Banging or hammering b. Higher than normal amp readings c. Meter showing higher than normal speed d. Dust accumulation
A voltmeter was used to check the coolant and a reading of 0.2 volt with the engine off was measured. A reading of 0.8 volt was measured with the engine running and all electrical accessories turned on. Technician A says that the coolant should be flushed to solve the galvanic activity. Technician B says that the ground wires and connections should be inspected and repaired to solve the electrolysis problem. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Identify the type of traverse shown in the specified figure.
1. See Figure R7–1. 2. See Figure R7–2. 3. See Figure R7–3. 4. See Figure R7–4. 5. See Figure R7–5.
An outside force called ________ can activate natural frequencies in a machine
A) acceleration B) cavitation C) vibration D) resonance