Where is a "direct vent" space heater installed?
A) In an interior wall
B) Typically they are free-standing in the room being heated.
C) Any place that still allows a vent pipe to run to the outside
D) In an exterior wall
D
You might also like to view...
Explain why product data submittals, samples, and shop drawings may be required for a project.
What will be an ideal response?
The vertical power lines (rails) of the ladder diagram represent the ____________________ of the circuit.
Fill in the blank(s) with the appropriate word(s).
This welding process is useful on certain materials and applications but is generally limited to thin materials, high-integrity joints, or small parts because of its slow welding speed and high cost of equipment and materials.
a. oxyacetylene welding b. shielded metal arc welding c. gas tungsten arc welding d. gas metal arc welding
PROBLEM 2.44 The rigid bar AD is supported by two steel wires of -in. diameter (E ? 29 × 106 psi) and a pin and bracket at A. Knowing that the wires were initially taut, determine (a) the additional tension in each wire when a 220-lb load P is applied at D, (b) the corresponding deflection of point D.