Decoders used to drive common-anode LEDs must have
A) a blanking output. B) active LOW outputs.
C) low ripple characteristics. D) active HIGH outputs.
B
You might also like to view...
The movement of water down through the soil is called ____________________
Fill in the blank(s) with correct word
What type of gasket is used on most modern upright refrigerators and freezers?
A. cord B. fabric C. magnetic rubber D. butyl rubber
A commercially available three-phase inductive motor operates at a full load of 120 hp (1 hp = 746 W) at 95% efficiency at a lagging power factor of 0.707. The motor is connected in parallel to a 80-kW balanced three-phase heater at unity power factor. If the magnitude of the line voltage is 480 V (rms), calculate the line current.
What will be an ideal response?
Once an interview has been granted, the employer will want to see ____.
A. your notebook with engineer's sketches B. one example of an engineering drawing you produced C. one example of a section drawings you created D. your portfolio of drawings