A container is half full of liquid. If the temperature of the liquid is increased, the liquid volume:
A) Will decrease and the empty space remaining in the container will increase.
B) Will increase and the empty space remaining in the container will decrease
C) Will remain the same because liquid volume is not affected by temperature.
D) Will increase and the empty space remaining in the container will also increase.
B
You might also like to view...
In conventional product design, phases of the development cycle occur ____.
A. concurrently B. sequentially C. holistically D. ambiguously
Technician A says a two-part glaze coat should be used as a final finish coat over the entire repair area. Technician B says the paint should be removed approximately 3 to 4 inches beyond the edge of the repaired surface when using conventional or lightweight fillers. Who is correct?
A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B
A crankcase pressure regulating valve can help prevent _____
a. refrigerant overcharge b. rapid suction pressure fluctuations c. compressor crankcase pressurization d. compressor motor overload
What is the term for plastics that will melt under fire conditions?
A. aluminum oxide B. mineral salts C. mineral spirits D. nothing