An FET's constant current region
A) depends on gate-source voltage as shown on drain curve
B) is between pinch-off voltage and breakdown region on characteristic curve
C) covers a relatively wide drain-source voltage range
D) all of the above
D
You might also like to view...
What part separates the lower valve body from the upper valve body?
A) Valve body channel B) Separator plate C) Divider D) Valve springs
What does the galvanizing term "G60" mean?
What will be an ideal response?
A power recirculating ball steering gear has repeated pitman shaft oil seal failures. The most likely cause of this problem is:
A. Loose sector lash adjustment B. Tight worm shaft bearing preload adjustment C. Loose steering gear mounting bolts D. Worn pitman shaft bushing or bearing
An ohmmeter should ________
A) be placed across the resistor after the resistor has been disconnected from the circuit B) be connected across a circuit with the power on C) be inserted into the circuit so the current flows through it D) have the polarity carefully checked before its use