The heater is the part of the motor starter overload that opens and interrupts current flow
Indicate whether the statement is true or false
FALSE
You might also like to view...
In the current construction industry, planning and scheduling software are used as billing tools.
Answer the following statement true (T) or false (F)
The spacing of control joints in a CMU wall _______.
A) is a function of the length-to-height ratio of the wall. B) should not exceed 25 ft. C) is a function of the average annual air temperature of the location. D) B and C. E) A and B.
Pinion preload is being set on a pinion using a collapsible spacer. After tightening the pinion nut the preload exceeds the specification by 20 inch pounds. What should the technician do?
A) Loosen the nut until the proper preload is measured B) Leave the nut in place, since the bearings will "wear in" C) Replace the bearings and start over D) Replace the spacer and repeat the adjustment
In poultry, the magnum secretes the thick white of the egg
Indicate whether the statement is true or false.