Prepared from engineering drawings and sketches and specifications provided by engineers, ____ contain: plan views, sections and/or details, schedules, bending details, and notes.
A. working drawings
B. concrete structure drawings
C. wall-column drawings
D. placing drawings
Answer: D
You might also like to view...
If the G-code is G21 G90 F6 G00 Z1.00:
A. The spindle will move at a rate of 6 inches per minute to a point where z = 1.00 in. B. The spindle will move at a rate of 6 inches per minute for a distance of 1.00 in. C. The spindle will move at a rate of 6 millimeters per minute to a point where z = 1.00 mm D. The spindle will move at a rate of 6 millimeters per minute for a distance of 1.00 mm
Dirt can affect all of these sensors, EXCEPT ________
A) Low frequency (older style) MAF B) High frequency (new style) MAF C) Cold wire MAF (mass air flow sensor) D) Hot wire MAF (mass air flow sensor)
When replacing or repairing any electrical components, always verify that the:
A) Refrigerant is a non-ozone-depleting chemical. B) Voltage is available to the unit. C) Replacement part is rated for more voltage than the original. D) Power source is disconnected and locked out.
Counters provide one of the ____ places to incorporate sustainable materials in a home.
A. most expensive B. most difficult C. best D. worst