A tire is worn excessively on both edges. The most likely cause of this type of tire wear is _________
A) Excessive axial runout B) Underinflation
C) Excessive radial runout D) Overinflation
B
You might also like to view...
When the print is in metric, the surface roughness is measured in:
a. thousandths of an inch b. micrometers c. microinches d. ten-thousandths of an inch
?A _______________ sensor measures changes in the intake manifold pressure that result from changes in engine load and speed.
Fill in the blank(s) with the appropriate word(s).
Gas pressure should be checked at the rooftop valve prior to installation. The gas line pressure for natural gas in inches of water column should not exceed
A) 10.5 in wc B) 2 psi C) 5.0 in wc D) 3.5 in wc
If a load is purely inductive and the reactive power is 10 VAR, the apparent power is ________
A) 10 VA B) 3.16 VA C) 1.144 VA D) 14.14 VA