All hybrid vehicles have their battery packs placed in protective zones and enclosed in containers.
Answer the following statement true (T) or false (F)
True
You might also like to view...
An ideal gas, initially at 30°C and 100 kPa, undergoes the following cyclic processes in a closed system:
What will be an ideal response?
(a) In mechanically reversible processes, it is first compressed adiabatically to 500 kPa, then cooled at a constant pressure of 500 kPa to 30°C, and finally expanded isothermally to its original state.
(b) The cycle traverses exactly the same changes of state, but each step is irreversible with an efficiency of 80% compared with the corresponding mechanically reversible process. Note: The initial step can no longer be adiabatic.
Calculate Q, W, ?U, and ?H for each step of the process and for the cycle. Take 
and 
Benjamin Franklin's plan for colonial home rule was rejected by the individual colonies because
A. it did not provide for the common defense. B. the British approved it. C. it did not seem to give enough independence to the colonies. D. they did not feel that they had been well represented at the Albany Congress. E. it placed too much power in the hands of local governments.
Answer the following statement(s) true (T) or false (F)
1. The charge termination set point (CTSP) is the voltage level setting of a charge controller that results in a charging current being supplied to the batteries. 2. Low voltage disconnect (LVD) is the amount of voltage set on a charge controller that when reached causes system loads to be disconnected to prevent battery overdischarging. 3. The series type charge controller uses a sensor (instead of a blocking diode) to prevent reverse current flow at night. 4. The pulse width modulation controller diverts excess charging current to some type of electrical load such as a fan or heater. 5. When a battery has a low state of charge, the charge controller will deliver a large charging current in an effort to charge the battery in a timely manner.
How are Category IV furnaces generally vented?
A) flexible foil B) PVC venting C) rigid metal D) stainless steel