?The BIM model can be used by the __________ __________ for maintenance and operations activities.
?
Fill in the blank(s) with the appropriate word(s).
facilities manager
You might also like to view...
Methods commonly used to measure the energy provided by a ration are _____
a. digestible energy c. nitrogen energy b. sun energy d. total energy
Describe the typical procedure for lifting and lowering a vehicle on a hoist.
What will be an ideal response?
All of the following statements are correct EXCEPT ________
A) Lower than specified injector resistance means the injector is shorted B) Fuel injectors on a gang fire system are wired in series C) The resistance of a group of injectors that fire at the same time can be tested together D) None of these
A V groove weld symbol with a "3/8" to the right of the symbol, both of which are under the reference line means ____.
A. the weld depth on the arrow side should be 3/8" B. the depth that the weld penetrates the surface should be 3/8" on the arrow side C. the depth that the weld penetrates the surface should be 3/8" on the other side D. the material that this weld is being placed on is 3/8" thick, and the weld should penetrate the entire separation E. None of the above. This is an incorrect symbol.