A misaligned connecting rod causes what type of engine wear?
A) Ridge wear B) Cylinder taper
C) Diagonal wear on the piston skirt D) Barrel-shaped cylinders
C
You might also like to view...
What type of reaction occurs when complete loads are done start to finish and then removed?
A) Batch reactions B) Continuous reactions C) Stirred reactions D) Inconsistent reactions
If a crew of masons is needed to lay 1,000 concrete blocks, and the estimator determined that two masons could complete the job in one eight-hour day, what is the estimated productivity rate for block laying?
a. 125 blocks per hour b. 62.5 blocks per hour c. 31.25 blocks per hour d. 16 blocks per hour
The first step in all cable pulls is to _____.
a. lubricate the cable b. measure runs and establish communications between both ends of the pull c. prepare the cable ends d. install fish tape
Antes de trabajar en circuitos desenergizados que tengan capacitores instalados, lo primero que debe hacer una persona calificada es:
a. usar varas con aislamiento para trabajo en alta tensión a fin de retirar los fusibles. b. cubrir las partes expuestas del circuito con una manta aislante. c. usar un equipo de prueba para verificar la ausencia de energía residual. d. usar un detector de cortocircuitos para hacer un cortocircuito con todas las partes del circuito.