The outboard shoe of a single piston caliper is pushed against the rotor by the ________
A) Caliper body B) Piston C) Caliper mounting D) Push rod
A
You might also like to view...
Typical ____ connections include the use of dowels or haunches.
A. beam-to-column B. column-to-column C. column-to-foundation D. foundation-to-column
On a project that supports a full-time on site resident project representative and a project manager who is based in the home office, to whom should contractor submittals (including all shop drawings) be submitted first?
A. project manager B. owner C. Design Manager D. resident project representative E. Depends upon the distance to the project site
Why did Ptolemaic Egypt last the longest of the Hellenistic kingdoms?
a. Egypt controlled a vast empire that included most of the former Persian Empire. b. Egypt was a governable kingdom whose wealth allowed it to remain militarily strong. c. Ptolemy I managed to conquer Greece and Macedonia, giving him control of the Greek homeland. d. Egypt was the poorest of the three main Hellenistic kingdoms, so the Ptolemies attracted few rivals for power.
All of the following statements are true EXCEPT:
A. Low-amperage circuits, usually 20 amps or less, can be tested directly with the DMM. B. To measure amperage with the DMM, you must move the positive test lead to the amperage jack. C. The amperage test setup places internal amperage fuse in series with the positive and negative meter leads. D. For the DMM to measure amperage, it must be placed in series with the circuit.