Which of the following modifications would alleviate refrigerant migration in a long-line system?

A) Removing any compressor crankcase heaters B) Adding a compressor hard-start kit
C) Reducing refrigerant charge D) Adding a liquid line solenoid


D

Trades & Technology

You might also like to view...

To charge a lead-acid battery, what must occur?

A. The water must be removed from the battery and replaced with sulfuric acid. B. An electric load must be placed across the battery's terminals. C. An alternating current supplied by the alternator must pass through the battery. D. A direct current must pass through the battery.

Trades & Technology

What are the three primary items that are the template of competitive bidding?

What will be an ideal response?

Trades & Technology

Pit and sump excavation is mostly performed using ____.

A. shovels B. front-end loaders C. backhoes D. excavators

Trades & Technology

The root reinforcement on the inside of the pipe from a completed weld should be flush to a maximum of

_____. a. 1/8" (3 mm) b. 1/4" (6 mm) c. 1/16" (1.6 mm) d. 1/2" (13 mm) WELDING LEVEL THREE MODULE 29306-16 EXAM 2 Copyright © 2016 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.

Trades & Technology