Technician A says that a hose clamp can be used to compress the retainer fingers of a parking brake cable in order to remove it from the backing plate. Technician B says a box-end wrench can be used instead of a hose clamp. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
C
You might also like to view...
An insulated steam turbine produces 67,000 hp of power. Steam enters the turbine at 2000 psia and 1000oF, with a velocity of 400 ft/s, through a duct with a cross-sectional area of 0.20 ft2. The steam exits with a velocity of 30 ft/s, at a temperature of 420oF. Determine the exit pressure and, if applicable, the exit quality of the steam.
Given: P1 = 2000 psia; T1 = 1000oF; V1 = 400 ft/s; A1 = 0.20 ft2; T2 = 420oF ; V2 = 30 ft/s; W?=67000 hp=47,365 Btu/s; Steam Assume: Q? = 0 (insulated) Also, for a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?PE = 0
What is the difference between crystalline and amorphic solids? Give examples of both.
What will be an ideal response?
The power seat operates normally, but the memory recall function does not. What could be the cause?
What will be an ideal response?
Stock allowance in inches, for hand reaming should be between:
A) .001 to .005 in. B) .016 to .020 in. C) .006 to .010 in. D) .011 to .015 in.