Power as it is used in electric circuits can be best defined as:

A) the rate motion is exerted over time. B) the rate voltage is applied over time.
C) the rate energy is used over time. D) the rate current flows over time.


C

Trades & Technology

You might also like to view...

When the compression readings on two adjacent cylinders are lower than specified, the ____________________ is probably leaking between cylinders.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Explain how post-tensioned steel slabs on grade are created.

What will be an ideal response?

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. A perpendicularity tolerance can only constrain rotational degrees of freedom relative to the datum referenced. 2. Perpendicularity can be applied to a planar surface, but not to a feature of size. 3. Where two datum references are used with a perpendicularity tolerance, the tolerance zone is perpendicular to the primary datum reference. 4. When a perpendicularity tolerance is applied to a planar surface, the deviation is verified by finding the distance between two parallel planes that all of the points of the surface are located within. 5. A common method used to verify a perpendicularity tolerance (MMC) is to use a height gage.

Trades & Technology

The allowable ampacity of a conductor run in a raceway with four to six conductors must be reduced by _____.

a. 50% b. 60% c. 75% d. 80%

Trades & Technology