The magneto-rheological fluid in shock absorbers or struts in an electronic suspension control system contains:
A. Power steering fluid
B. Commercial grade hydraulic fluid
C. 75w-90
D. Suspended iron particles.
Answer: D
You might also like to view...
What are the three elements a contractor must prove in order to establish an early completion claim?
What will be an ideal response?
A taper can be specified on a drawing:
A. In degrees of taper B. As a taper ratio C. By notation that a standard industrial taper is required D. By any of the ways described in a, b, and c above
A container is half full of liquid. If the temperature of the liquid is increased, the liquid volume:
A) Will decrease and the empty space remaining in the container will increase. B) Will increase and the empty space remaining in the container will decrease C) Will remain the same because liquid volume is not affected by temperature. D) Will increase and the empty space remaining in the container will also increase.
Welding in vertical and overhead positions should not be attempted with SMAW electrodes larger then 3/16? in
diameter unless the electrode is classified as _____. a. low-hydrogen (F4) b. fast-freeze (F3) c. fill-freeze (F2) d. fast-fill (F1)