Quiz Preview 6' Trades & Technology - Automotive

What would be the percent horsepower loss while going through the Eisenhower Memorial Tunnel?

Which type of cleaning uses small living organisms to eat oil and grease?

Which of these is checked during an OBD II functionality test?

Repeated hard stops in a short period of time can severely overheat brake components and reduce braking effectiveness. This is called ____________________.

5

What can occur if a hybrid electric vehicle is pushed in the shop?

6

Anytime a set of aluminum wheels is installed, the lug nuts should be re-torqued after how many miles?

7

A visual inspection includes all of these EXCEPT _________

8

What are the purposes of locking hubs on a four-wheel drive vehicle?

9

Some cabin filters contain ________ to absorb odors.

10

____________________ occurs when oil is washed from cylinder walls.

11

After removing the drum, the brake assembly should be wetted with brake cleaner solvent. This is to prevent ________ from becoming airborne

12

Pressure bleeding requires ________

13

There are three major fallacies of traditional management that reduces the efficiency of managers under this system. List them

14

Technician A says that analog scopes use an LCD display. Technician B says that digital scopes may use a CRT display. Which technician is correct?

15

All of the following statements about the EGR valve are true, EXCEPT:

16

ASE-Style Multiple Choice ____ are the box members extending out near the bottom of the front section.

17

How do radar cruise systems use active braking?

18

Electrical controls such as switches ___________

19

The friction material of a new brake pad can be identified from a code printed on the edge of the pad or shoe. This code is called the_______________________.

20

Most late model full electric drivetrains (without 12V battery) can be jump-started.

21

How can caster settings be used to compensate for road crown?

22

Technician A says that conventional piston rings wear the bore more than low-tension rings. Technician B says low-tension rings must have less cylinder bore taper than conventional rings. Who is right?

23

A supplier sends a $2538.72 bill to a repair shop. The bill has the notation 2% 10/Net 30. What will the repair shop have to pay if the entire bill is paid within 10 days?

24

How much current passes through a 200-watt motor having a resistance of 1.0 Ω?

25

A(n) _______ circuit has a path to the source of power before it reaches the load.

26

Which of the following is NOT part of the UTQG system?

27

The ASE tests are given every ________

28

Technician A says the comprehensive component monitor will use three-trip logic when determining when to set a DTC and illuminate the MIL. Technician B says an OBD II system requires a drive cycle to occur that meets specific enable criteria before the monitors will run to completion. Who is correct?

29

It may be considered discrimination against women if the job description requires that all applicants must be able to lift 75 pounds if this is not really a job requirement

30

The ____ sensor uses the principle that if a current is allowed to flow through thin conducting material that is exposed to a magnetic field, another voltage is produced.

Find your answers, solutions and more...

We made it much easier for you to find exactly what you're looking for on Sciemce. Enjoy our search engine "Clutch."

Save a GPA. Donate your notes with us.

Quiz Preview 6' Trades & Technology - Automotive

Recent Packs