Login
Remember
Register
ScieMce
Find your answers, solutions and more...
We made it much easier for you to find exactly what you're looking for on Sciemce. Enjoy our search engine "Clutch."
Save a GPA. Donate your notes with us.
the clutch assembly is comprised of a driving disc, the _______ and a drive disc, the ______ disc
asked
Aug 20, 2022
in
Trades & Technology
by
mrhjw99
automotive
Please
log in
or
register
to answer this question.
0
Answer
More questions like this
A clutch is being removed to gain access to replace a leaking block expansion plug. Technician A says that the pressure plate should be marked so it can be reinstalled in the same location on the flywheel just in case the vehicle uses a clutch/flywheel that is balanced as an assembly. Technician B says that the clutch disc should be marked so it can be installed on the input shaft in the same location. Which technician is correct?
asked
Jul 25, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
All of the following problems could result in clutch disc burning EXCEPT:
asked
Nov 21, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
Technician A says that the flywheel should be resurfaced whenever the clutch friction disc and pressure plate are replaced. Technician B says that it may be necessary to install a shim between the crankshaft and the flywheel if the flywheel is machined. Which technician is correct?
asked
Jul 25, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
After a clutch assembly was installed in a pickup truck equipped with a hydraulic clutch, the clutch would not disengage. Technician A states that the hydraulic clutch may need to be properly bled. Technician B states the clutch master cylinder may be defective. Which technician is correct?
asked
Jul 25, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
Two technicians are discussing a synchronizer assembly in a three speed manual transmission. Technician A says the splines on a synchronizer clutch sleeve should be pointed. Technician B says the teeth on a synchronizer sleeve and ring should be smooth and rounded. Who is correct?
asked
Jul 21, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
Two technicians are discussing a clutch master assembly. Technician A says external leaks are due to the secondary seal. Technician B says hydraulic fluid is hygroscopic and tends to absorb moisture from the atmosphere. Who is correct?
asked
Jul 21, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
A viscous clutch is a single-disc clutch assembly housed in a sealed container filled with a special fluid.
asked
Feb 20, 2019
in
Trades & Technology
by
Shawn69
automotive
Technician A says if a friction disc looks burned but there is sufficient friction material remaining, it can be serviced. Technician B says if the steel plates in a clutch disc assembly are worn flat, they should be replaced. Who is correct?
asked
Feb 6, 2019
in
Trades & Technology
by
rgthegreat
automotive
Technician A says a torque converter clutch plate has a spring-cushioned damper assembly in the center of the disc, and friction material on the outside of the plate. Technician B says the torque converter clutch plate is splined to the turbine shaft, and the plate locks the turbine to the converter when the piston is applied. Who is correct?
asked
Feb 6, 2019
in
Trades & Technology
by
Inno78
automotive
A clutch disc is being installed. Technician A says that the damper assembly of the clutch disc normally faces the pressure plate. Technician B says that the disc splines should be lightly lubricated. Which technician is correct?
asked
Nov 7, 2018
in
Trades & Technology
by
amanda23831
automotive
The flywheel is the ________of the engine's crankshaft that is the driving component of the clutch disc.
asked
Mar 13, 2019
in
Trades & Technology
by
Becky1
automotive
A vehicle lacks power when accelerating from a stop. Technician A says this could be caused by chipped teeth on the pinion gears. Technician B says the torque converter's one-way stator clutch may be slipping. Who is correct?
asked
Dec 5, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
A transaxle's torque converter clutch is not engaging. Technician A says this is caused by the TFT sensor. Technician B says this could be caused by the ECT sensor. Who is correct?
asked
Dec 5, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
Technician A says the electronic transmission control module uses information from other control modules. The ECT engine coolant temperature sensor's input is used for TCC torque converter clutch control. Technician B says in today's electronic transmission, the governor has been replaced by the TPS or throttle position sensor . Who is correct?
asked
Dec 5, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
While discussing a 6L45, 6L50, 6L80 or 6L90 with no reverse all other ranges work great. Technician A states this could be caused by a faulty output carrier front sun gear. Technician B states this could be caused by a faulty clutch select valve 3. Who is correct?
asked
Nov 21, 2021
in
Trades & Technology
by
GGLadiesandGents
automotive
After stocking the ambulance this morning, you and your partner go out for breakfast. While entering the restaurant, you see an older gentleman clutch his chest and collapse to the floor. When you get to him, he has no pulse and is not breathing. While you performed CPR on this patient, your partner retrieved the _____________, which will deliver an appropriate electrical shock.
asked
Nov 8, 2021
in
Health Professions
by
hunthogan2
emergency-medical-services
After stocking the ambulance this morning, you and your partner go out for breakfast. While entering the restaurant, you see an older gentleman clutch his chest and collapse to the floor. When you get to him, he has no pulse and is not breathing. To treat this patient, you will follow:
asked
Nov 8, 2021
in
Health Professions
by
Physician
emergency-medical-services
After stocking the ambulance this morning, you and your partner go out for breakfast. While entering the restaurant, you see an older gentleman clutch his chest and collapse to the floor. When you get to him, he has no pulse and is not breathing. What level of training would allow you to perform an electrocardiogram and advanced life support on the patient?
asked
Nov 8, 2021
in
Health Professions
by
sadieabdullah46
emergency-medical-services
After stocking the ambulance this morning, you and your partner go out for breakfast. While entering the restaurant, you see an older gentleman clutch his chest and collapse to the floor. When you get to him, he has no pulse and is not breathing. While you checked the patient's airway, breathing, and circulation, your partner considered the benefits of requesting a(n) __________ ambulance to assist with patient care.
asked
Nov 8, 2021
in
Health Professions
by
Beth401
emergency-medical-services
After stocking the ambulance this morning, you and your partner go out for breakfast. While entering the restaurant, you see an older gentleman clutch his chest and collapse to the floor. When you get to him, he has no pulse and is not breathing. Which of the following authorizes you, as an EMT, to provide emergency care to this patient?
asked
Nov 8, 2021
in
Health Professions
by
Caitlyn
emergency-medical-services
Welcome to Sciemce, where you can ask questions and receive answers from other members of the community.
Recent Packs
ch 10
25
items
by
Kingrick09
automotive
#8
74
items
by
kooch54071
introduction-to-business
automotives
21
items
by
Kingrick09
automotive
Multicultural Issues in LE
20
items
by
thanasis458
electives-upper-level
2
51
items
by
dagogonz
business-law
kdfne4
19
items
by
dagogonz
business-law
quiz 15
10
items
by
scrumpadoo
american-government-and-politics
mis
76
items
by
alerods22
management-information-systems
Final
31
items
by
j.lopezrojas1
management-information-systems
mis
82
items
by
lara gggggg
management-information-systems
help 2
11
items
by
BillyLuu
social-and-applied-psychology
new
20
items
by
marcustbg
introductory-astronomy
1
6
items
by
nwdr
management
Final Exam
48
items
by
MM1122
automotive
final exam
50
items
by
ehbdehbiefbef
automotive
chapter 10
14
items
by
MM1122
automotive
Research Final
47
items
by
griffs110
correctional
pm
48
items
by
yuny
decision-science
Bossbot
17
items
by
Champ
developmental-psychology
3
18
items
by
isabellaw123
marketing
...